Prediction of non-linear mechanical behavior of shear deformed twill woven composites based on a multi-scale progressive damage model
| Autor: | Kyung-Hee Choi, Hak-Sung Kim, Yeon-Taek Hwang, Jae-In Kim, Jaeyoung Lim, Byeunggun Nam |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Materials science
Composite number 02 engineering and technology Yarn Amplification factor 021001 nanoscience & nanotechnology Nonlinear system 020303 mechanical engineering & transports 0203 mechanical engineering Shear (geology) visual_art Ceramics and Composites Representative elementary volume visual_art.visual_art_medium Shear angle Vacuum assisted resin transfer molding Composite material 0210 nano-technology Civil and Structural Engineering |
| Zdroj: | Composite Structures. 224:111019 |
| ISSN: | 0263-8223 |
| DOI: | 10.1016/j.compstruct.2019.111019 |
| Popis: | In this paper, the non-linear mechanical behavior of shear deformed woven composite was predicted using a representative volume element (RVE) model based on multi-scale progressive failure analysis. The micro-scale RVE model, consisting of single fiber and a matrix, was employed to determine the stress amplification factor and distinguish the failure of each fiber and the matrix constituent. Then, a meso-scale RVE model of shear deformed twill woven composite was developed to predict non-linear behavior using micro-stress transferring with finite element simulation. Fiber yarn shapes were observed with respect to the shear angle of the twill fabric. Based on the observed yarn geometry, shear deformed twill composite was modeled by using the open source software TexGen. To prove validity of the proposed model, shear deformed twill woven composite was fabricated using a picture frame, followed by a vacuum assisted resin transfer molding process. Mechanical tests were conducted and the failure progress during the tests was observed to determine their failure analysis. As a result, a good correlation between the multi-scale progressive damage model and experimental results such as mechanical properties, the non-linear stress-strain curve, and failure modes were achieved. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect