| Autor: |
Ching-Ping Wong, R.N. Master, Sangil Lee, Daniel F. Baldwin, Myung Jin Yim |
| Rok vydání: |
2008 |
| Předmět: |
|
| Zdroj: |
IEEE Transactions on Electronics Packaging Manufacturing. 31:297-305 |
| ISSN: |
1521-334X |
| DOI: |
10.1109/tepm.2008.2002951 |
| Popis: |
The advanced flip chip in package (FCIP) process using no-flow underfill material for high I/O density and fine-pitch interconnect applications presents challenges for an assembly process that must achieve high electrical interconnect yield and high reliability performance. With respect to high reliability, the voids formed in the underfill between solder bumps or inside the solder bumps during the no-flow underfill assembly process of FCIP devices have been typically considered one of the critical concerns affecting assembly yield and reliability performance. In this paper, the plausible causes of underfill void formation in FCIP using no-flow underfill were investigated through systematic experimentation with different types of test vehicles. For instance, the effects of process conditions, material properties, and chemical reaction between the solder bumps and no-flow underfill materials on the void formation behaviors were investigated in advanced FCIP assemblies. In this investigation, the chemical reaction between solder and underfill during the solder wetting and underfill cure process has been found to be one of the most significant factors for void formation in high I/O and fine-pitch FCIP assembly using no-flow underfill materials. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
