Characteristics of Machining Parameters on WEDM Titanium Alloy
Autor: | Mohd Azman Yahaya, Juri Saedon, Norkamal Jaafar |
---|---|
Rok vydání: | 2016 |
Předmět: |
Work (thermodynamics)
Materials science 020209 energy Mechanical Engineering Metallurgy Process (computing) Peak current Titanium alloy 02 engineering and technology Condensed Matter Physics Brass Electrical discharge machining Machining Mechanics of Materials visual_art 0202 electrical engineering electronic engineering information engineering visual_art.visual_art_medium Surface roughness General Materials Science Composite material |
Zdroj: | Materials Science Forum. 872:23-27 |
ISSN: | 1662-9752 |
DOI: | 10.4028/www.scientific.net/msf.872.23 |
Popis: | Wire electrical discharge machining is a material removal process of electrically conductive materials by the thermo-electric source of energy. This kind of machining extensively used in machining of materials with highly precision productivity. This work presents the machining of titanium alloy (TI-6AL-4V) using wire electro-discharge machining with brass wire diameter 0.5mm.The objective of this work is to study the influence of three machining parameters namely peak current, pulse off time and wire tension to cutting rate, material removal rate, surface roughness and kerf width followed by suggesting the best operating parameters towards good machining characteristics. A full factorial experimental design was used with variation of peak current, feed rate and wire tension, with results evaluated using analysis of variance techniques. Parameter levels were chosen based on best practice and results from preliminary testing. Main effects plots and percentage contribution ratios are included for the main factors and their interactions. |
Databáze: | OpenAIRE |
Externí odkaz: |