Design of a Compact, Low Inductance 1200 V, 6.5 mΩ SiC Half-Bridge Power Module with Flexible PCB Gate Loop Connection
| Autor: | Rolando Burgos, Grace Watt, Amy Romero, Marko Jaksic |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Materials science
business.industry 05 social sciences Electrical engineering 020207 software engineering 02 engineering and technology Inductance chemistry.chemical_compound chemistry Logic gate Power module MOSFET Hardware_INTEGRATEDCIRCUITS 0202 electrical engineering electronic engineering information engineering Silicon carbide 0501 psychology and cognitive sciences business 050107 human factors Antiparallel (electronics) Rogowski coil Diode |
| Zdroj: | 2019 IEEE Applied Power Electronics Conference and Exposition (APEC). |
| DOI: | 10.1109/apec.2019.8722138 |
| Popis: | This paper describes the design, packaging and test setup of a compact, low inductance, 1200 V, 6.5 mΩ half-bridge power module. In the design of this power module, the use of new techniques advances the properties of a SiC power module. The design has a power loop inductance of 3.9 nH and a gate loop inductance of 0.3 nH determined by Ansys Q3D. The low gate loop inductance is achieved with the use of a flexible gate circuit to connect to the gate and source of the die as well as a desaturation test point. Lastly, the use of the MOSFET body diode in place of an antiparallel external diode allows for a compact layout. The design of a symmetrical layout and the fabrication of the power module is described. Two power modules are designed to compare current sharing behavior, the control sample with balanced die, the other sample with unbalanced die. A clamped inductive load tester set-up is designed to interface uniquely with the flexible PCB pins and the leads of the module. Use of Rogowski coils can allow for analysis of the individual die currents to determine the effects of unbalanced die on the power module performance. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|