Friction and Surface Morphological Studies in Plastic Deformation under Boundary Lubrication Condition

Autor:	R. K. Banerjee, C. R. Jagga, A. Sethuramiah
Rok vydání:	2001
Předmět:	Materials science Mechanical Engineering Base oil Commercial Oils Mineralogy Surfaces and Interfaces Steel ball Surfaces Coatings and Films Nominal size Impact crater Mechanics of Materials Lubricant Composite material Deformation (engineering) Boundary lubrication
Zdroj:	Tribology Transactions. 44:233-241
ISSN:	1547-397X 1040-2004
DOI:	10.1080/10402000108982453
Popis:	A new testing technique has been developed to represent a surface plastic deformation process under high sliding speed and load and under boundary lubrication conditions. The technique involves oblique plastic impact with a steel ball, in which a boundary lubricant film on a steel surface is subjected to the simultaneous action of high load and sliding speed. The purpose of this is to explore the behavior of boundary lubricants under solid surface plastic deformation conditions. By varying the angle of impact and height, large variations in sliding speed and load can be achieved. The lubricant is applied with a nominal thickness of 1.0 μm reducing the possibility of hydrodynamic effects. Detailed examination of impact craters by microscopy distinguished the different lubricants effectively. A distinction could be made between oleic acid, stearic acid, palm oil and base oil. Some commercial oils were also studied and their differences could be distinguished. Friction during contact was also studied by noti...
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::596a86548f6d61af2774a4609d74d83f https://doi.org/10.1080/10402000108982453 Zobrazit plný text záznamu