Fabrication of Hollow Fiber Membrane from Polyarylate–Polyarylate Block Copolymer for Air Separation
| Autor: | G. G. Kagramanov, I. P. Storozhuk, M. P. Semyashkin, M. V. Ivanov, G. A. Dibrov, N. G. Pavlukovich |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
chemistry.chemical_classification
Materials science General Chemical Engineering Energy Engineering and Power Technology 02 engineering and technology General Chemistry Permeance Polymer 021001 nanoscience & nanotechnology Fuel Technology Membrane 020401 chemical engineering Chemical engineering chemistry Geochemistry and Petrology Hollow fiber membrane Barrer Copolymer Fiber 0204 chemical engineering 0210 nano-technology Spinning |
| Zdroj: | Petroleum Chemistry. 58:289-295 |
| ISSN: | 1555-6239 0965-5441 |
| DOI: | 10.1134/s0965544118040047 |
| Popis: | A process has been developed for spinning asymmetric hollow fiber membranes from a polyarylate–polyarylate block copolymer having a separation factor for pure gases in the oxygen–nitrogen pair of α(O2/N2) = 6.3 and an oxygen permeance coefficient of 2.4 Barrer. The effect of the polymer molecular weight, the composition of the dope solution, and the spinning parameters on the gas transport properties of the hollow fiber membrane and its geometry has been studied. The use of a polymer with a molecular weight of 67 kDa, as well as the introduction of surfactants into the dope solution, has made it possible to prepare samples of defect-free membranes with an oxygen permeance of 120 L(STP)/(m2 h bar) and a separation factor of α(O2/N2) = 6.5, which correspond to the selective layer thickness of 60 nm. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|