| Popis: |
Purpose This paper aims to investigate the influence of sinusoidal texture (ST) with different morphology parameters on the corresponding tribological effects. Design/methodology/approach The STs with different amplitudes, ranging from 0.05 to 0.3 mm, and frequencies, ranging from 5 to 17.5, are fabricated using nanosecond pulsed laser equipment. The friction experiments and the finite element analysis method are combined to investigate the tribological properties, under dry friction conditions. Findings Test results show that when the amplitude is 0.15 mm and frequency is 10, ST surface has the lowest friction coefficient of 0.373, and exhibits great anti-friction effect. It also possesses a complete texture edge after friction. The friction reduction effect of ST with larger or smaller amplitude and frequency is worse. Originality/value The results of this study can provide a guidance for the design optimization of ST of reciprocating sliding contact surfaces, under dry friction conditions. |
