| Autor: |
A. della Corte, Yu.A. Ilyin, Arend Nijhuis, Wilhelm A.J. Wessel, H.H.Jt. Kate, H.G. Knoopers |
| Rok vydání: |
2005 |
| Předmět: |
|
| Zdroj: |
IEEE Transactions on Appiled Superconductivity. 15:3466-3469 |
| ISSN: |
1051-8223 |
| DOI: |
10.1109/tasc.2005.849060 |
| Popis: |
The large Cable-In-Conduit Conductors (CICC) designed for the magnet coils in the International Thermonuclear Experimental Reactor (ITER), are composed of Nb/sub 3/Sn strand bundles in a Stainless Steel (SS) or Incoloy conduit. Both, the thermal contraction of the strand composite and the conduit material, define the final pre-strain after cooling down and thus affect the strand critical current (I/sub c/). The transverse forces, introduced when charging a coil, in addition affect the overall strain state due to bending and pinching of strands. Recently, periodic bending tests were applied on strand samples without additional axial compressive pre-strain. Here we explore the method of swaging a SS-tube around a strand to imitate the cool-down strain effect of the conduit. The experimental results of the I/sub c/ measurements at 12 T and 4.2 K are presented for a Nb/sub 3/Sn PIT strand with and without swaged SS tube on both Ti-6Al-4V and SS standard ITER sample holder (barrels). The effect of gluing the sample to the barrel is also investigated. The intrinsic strain state of the samples is verified by measurement of the I/sub c/ versus applied strain with the Pacman spring. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
