Autor: |
Renzo Nesti, Tonino Pisanu, A. Orfei, G. Valente, P. Marongiu, Alessandro Navarrini, J. Roda, Pietro Bolli, S. Mariotti |
Rok vydání: |
2010 |
Předmět: |
|
Zdroj: |
SPIE Proceedings. |
ISSN: |
0277-786X |
Popis: |
We present the design of the passive feed system of the dual-band receiver for the prime focus of the Sardinia Radio Telescope (SRT), a new 64 m diameter radio telescope which is being built in Sardinia, Italy. The feed system operates simultaneously in P-band (305-410 MHz) and L-band (1300-1800 MHz). The room temperature illuminators are arranged in coaxial configuration with an inner circular waveguide for L-band (diameter of 19 cm) and an outer coaxial waveguide for P-band (diameter of 65 cm). Choke flanges are used outside the coaxial section to improve the crosspolarization performance and the back scattering of the P-band feed. The geometry was optimized for compactness and high antenna efficiency in both bands using commercial electromagnetic simulators. Four probes arranged in symmetrical configuration are used in both the P and the L-band feeds to extract dual-linearly polarized signals and to combine them, through phased-matched coaxial cables, into 180 deg hybrid couplers. A vacuum vessel encloses the two P-band hybrids and the two L-band hybrids which are cooled, respectively at 15 K and 77 K. For the P-Band, four low loss coaxial feedthroughs are used to cross the vacuum vessel, while for the L-Band a very low loss large window is employed. The P-band hybrids are based on a microstrip rat-race design with fractal geometry. The L-band hybrids are based on an innovative double-ridged waveguide design that also integrates a band-pass filter for Radio Frequency Interference (RFI) mitigation. |
Databáze: |
OpenAIRE |
Externí odkaz: |
|