| Popis: |
Chemical vapor deposition (CVD) W plugs have been widely used for device metallization with excellent conformity in small contacts/vias with high aspect ratio [J. E. J. Schmitz, Chemical Vapor Deposition of Tungsten and Tungsten Silicides (Noyes, 1991)]. However, some unexpected plug fill such as plug loss and key hole exposing post tungsten chemical mechanical planarization (WCMP) still happened while going to smaller plug size and using metalorganic chemical vapor deposition (MOCVD) TiN barrier. In this study, MOCVD TiN and CVD W fill followed by WCMP for plug metallization were investigated. Extensive analysis had been conducted on various types of defective W plugs. Organic contaminants (hydrocarbon by-products) in MOCVD TiN deposition would prevent W deposition taking place inside the plug. For W wise, lower process temperature, carefully adjusted WF6/SiH4 and WF6/H2 partial pressure ratios had demonstrated better plug fill and electrical performance [T. E. Clark et al., J. Vac. Sci. Technol. B 9, 14... |
