Corrosion mechanism of spray refractory in COREX slag with varying basicity
| Autor: | Huizhong Zhao, Qingfeng Zou, Yichong Li, Han Zhang, Dunxiang Pan, Pengda Zhao |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
010302 applied physics
Materials science Scanning electron microscope Process Chemistry and Technology Spinel Metallurgy Sintering Corundum Mullite 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology 01 natural sciences Surfaces Coatings and Films Electronic Optical and Magnetic Materials Corrosion 0103 physical sciences Smelting Materials Chemistry Ceramics and Composites engineering 0210 nano-technology Corex |
| Zdroj: | Ceramics International. 45:24398-24404 |
| ISSN: | 0272-8842 |
| DOI: | 10.1016/j.ceramint.2019.08.161 |
| Popis: | Bauxite-based spray refractories typically exhibit excellent mechanical strength and wear resistance, and have been widely used as lining materials in various industrial furnaces for many years. However, smelting reduction ironmaking in the COREX-produced slag carried out under a gas flowing at a high speed causes refractory corrosion at high temperature. Herein, Al2O3–SiO2–CaO spray refractories were fabricated, and corrosion tests were conducted in an air atmosphere using the formulated COREX slag by varying the slag basicity from 0.5 to 1.0. The mechanism underlying the corrosion between the fabricated spray refractories and formulated COREX slag was investigated via X-ray diffraction, scanning electron microscopy (backscattered electron image and energy-dispersive X-ray spectroscopy), and thermodynamic simulations to establish a new corrosion model. The results showed that after sintering at 1300 °C, the prepared specimens contained corundum, mullite, and anorthite as the major crystalline phases. The reaction and penetration layers were observed from the surface to the interior of the specimens after corrosion. A high-melting-point phase, Mg(Al,Fe)2O4 spinel layer, was generated at the slag–refractory interface, which effectively protected the specimens from further interaction with the molten slag, and afforded better corrosion resistance. The reaction layer corroded due to the phase conversion into the Ca2Al2SiO7 in the matrix. The thermodynamic simulation results of the interaction between the slag and refractory were consistent with those of the corrosion test. The total corrosion depth of the specimen was optimum when the slag basicity was 0.9. This study investigates the optimal performance environment of the spray refractory inside the COREX and provides an effective guide for designing the phase composition of related refractories. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect