Effects of Polymer Crystallinity on Deposition Efficiency and Porosity in Cold Spray of PEKK

Autor: M. S. Kaminskyj, M. S. Schwenger, D. A. Brennan, F. M. Haas, Joseph F. Stanzione
Rok vydání: 2022
Zdroj: International Thermal Spray Conference.
ISSN: 2768-1505
2768-1491
DOI: 10.31399/asm.cp.itsc2022p0082
Popis: Polymer cold spray has yielded lower deposition efficiency (DE) and quality deposits compared to metal cold spray. The disparity stems from metals being studied far longer than polymers in cold spray; in addition, polymers exhibit richer thermo-mechanical behavior. An experimental study was conducted to examine the effects of polymer feedstock degree of crystallinity (D) on cold sprayed deposits of polyetherketoneketone (PEKK), a thermoplastic used in aerospace and other high-performance applications. As deposition relies on the plastic deformation of the impacting particle, polymers with high D may inhibit deposition, reducing deposit quality and efficiency. This study evaluates three PEKK grades produced using different ratios of terephthalic (T) to isophthalic (I) monomer moieties (T/I = 60/40, 70/30, 80/20). The ratios control D, with higher proportions of T monomers corresponding to higher crystallization rates and degrees of crystallinity. A parametric study was completed to evaluate functional process set points of system carrier gas temperature and powder mass flow rate. Using operational parameters common among the PEKK grades, spray cycles were completed for each material and quantitative responses to variation in crystallinity were evaluated through a suite of analyses. DE of the materials was assessed gravimetrically, deposit porosity was evaluated by scanning electron microscopy, and thermophysical changes to the feedstock during the spray cycle were determined by differential scanning calorimetry. Overall, we found that cold spray processing of powders of lower D formed less porous deposits with a higher DE than more crystalline powders sprayed at the same process conditions. PEKK grades with lower T/I ratios achieved DEs in the range of 60-75%, whereas the most T enriched grade only reached ~10% DE.
Databáze: OpenAIRE
Externí odkaz: