Evaluation of Electromechanical Properties in Multiple HTS Layered Conductors at 77 K
Autor: | Nisay Arman Ray N, Gwan-tae Kim, Hong-Soo Ha, Hyung-Seop Shin, Mark Angelo Diaz, Sang-Soo Oh |
---|---|
Rok vydání: | 2021 |
Předmět: |
Superconductivity
High-temperature superconductivity Materials science chemistry.chemical_element Substrate (electronics) Superconducting magnet Condensed Matter Physics 01 natural sciences Neodymium Electronic Optical and Magnetic Materials Conductor law.invention chemistry law Magnet 0103 physical sciences Electrical and Electronic Engineering Composite material 010306 general physics Electrical conductor |
Zdroj: | IEEE Transactions on Applied Superconductivity. 31:1-4 |
ISSN: | 2378-7074 1051-8223 |
Popis: | High engineering critical current density ( J e) is demanded in high-performance large-scale applications such as power cables, high-magnetic-field magnets, accelerators, and fusion reactors. In developing high current capacity and low vulnerability under a high magnetic field, high-temperature superconducting (HTS) rare-earth barium copper oxide coated conductors (CCs) have undergone various trials, and CC tape characteristics have ultimately been greatly improved. The Korea Electrotechnology Research Institute recently developed a “multiple HTS layers on one substrate” (MHOS) conductor that can carry high critical current, I c, based on the number of superconducting layers deposited on one substrate. The superconducting layers in a MHOS conductor are much thicker than in a single-layered CC tape, possibly affecting the degradation behaviors of I c under a mechanical load. To ensure the performance and reliability of MHOS conductors, it is necessary to evaluate the strain/stress response of I c. In this study, the electromechanical properties of MHOS conductors were investigated using the uniaxial tension test method as well as the single-sided bending test at 77 K and self-field and at 0.5 T using a pair of neodymium permanent magnets. |
Databáze: | OpenAIRE |
Externí odkaz: |