Fatigue behavior of a freestanding Pt-aluminide (PtAl) bond coat at ambient temperature
| Autor: | Md. Zafir Alam, Vikram Jayaram, Mahesh K. Kumawat, Rajdeep Sarkar |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Coalescence (physics)
Materials science Intermetallic Surfaces and Interfaces General Chemistry engineering.material Strain hardening exponent Intergranular corrosion Condensed Matter Physics Fatigue limit Surfaces Coatings and Films Coating Materials Chemistry engineering Dislocation Composite material Aluminide |
| Zdroj: | Surface and Coatings Technology. 427:127787 |
| ISSN: | 0257-8972 |
| DOI: | 10.1016/j.surfcoat.2021.127787 |
| Popis: | The intermetallic B2-NiAl based diffusion Pt-aluminide (PtAl) bond coat is applied on aero-engine components. The coating is prone to brittle fracture, which necessitates the evaluation of its fatigue behavior. In the present study, micro-fatigue testing is conducted on freestanding 70 μm thick PtAl coating at ambient temperature. The fatigue life is as low as 30,000 cycles and exceeds 106 cycles above and below the endurance limit of 248 MPa. High dislocation density, dislocation cells, and dislocation-dislocation/dislocation-precipitate interactions induce strain hardening in the coating. Micro-voids initiate by de-cohesion of precipitate/B2-matrix interface in the heavily precipitated interdiffusion zone of the coating. The intergranular propagation of micro-cracks, developed by micro-void coalescence, causes failure. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect