In situ measurements of shear stress, erosion and deposition in man-made tidal channels within a tidal saltmarsh

Autor: Jack A. Puleo, Jens Figlus, Thomas E. McKenna, Aline Pieterse
Rok vydání: 2017
Předmět:
Zdroj: Estuarine, Coastal and Shelf Science. 192:29-41
ISSN: 0272-7714
Popis: A field study was conducted in man-made ditches in a tidal saltmarsh in Lewes, Delaware, USA. Ditches are prevalent throughout tidal marshes along the Atlantic US coast, and influence hydrodynamics and sediment transport. The field study focused on measuring near-bed velocity, shear stress, sediment concentration, and bed level variability at 5 stations over a 3-week period. Velocities in the ditch (2–5 m wide, 1 m deep) peaked between 0.4 and 0.6 m/s and were slightly ebb dominated. Velocity and shear stress were maximum during a storm event, with peak shear stresses of 2 N/m2. Bed levels were estimated from acoustic amplitude return of a downward-looking velocity profiler. The bed level in the ditch at the landward locations increased ∼ 0.03 m over 3 weeks, while there was ∼ 0.01 m bed level decrease at the most seaward site suggesting a net import of sediment into the channel. At all sites, erosion ( ∼ 0.005–0.015 m) occurred during the accelerating phase of the flood tide, and accretion of a similar magnitude occurred during the decelerating phase of the ebb tide. This erosion-deposition sequence resulted in small net changes in bed level at the end of each tidal cycle. The intratidal behavior of the bed level was simulated using erosion and deposition flux equations based on shear stress, critical shear stress, and suspended sediment concentration. Erosion was predicted well with RMS errors on the order of 2 ⋅ 10−3 m. The bed level during the deposition phase could not be reproduced using the simple approach. Model inaccuracies for deposition were attributed to advection and variations in fall velocity due to flocculation that were not modeled due to lack of ground-truth observations.
Databáze: OpenAIRE
Externí odkaz: