| Autor: |
K. Ando, Naoki Watanabe, E. Okada, H. Maehara, K. Tsunekawa, Yoshishige Suzuki, Shinji Yamagata, Shinji Yuasa, David D. Djayaprawira, Motonobu Nagai |
| Rok vydání: |
2006 |
| Předmět: |
|
| Zdroj: |
IEEE Transactions on Magnetics. 42:103-107 |
| ISSN: |
0018-9464 |
| DOI: |
10.1109/tmag.2005.861786 |
| Popis: |
Inserting a 4 /spl Aring/-Mg metal layer between the amorphous CoFeB bottom electrode layer and the MgO barrier layer was found to be effective in realizing huge magnetoresistance effect in low-resistance CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs). As a result, magnetoresistance (MR) ratio as high as 138% at resistance-area product (RA) of about 2.4 /spl Omega//spl middot//spl mu/m/sup 2/ was obtained. This value is about seven times that of state-of-the-art MTJs for magnetic sensor application. X-ray diffraction analysis clarified that crystal orientation of the poly-crystalline MgO(001) barrier layer was improved by the Mg layer. It is suggested that the higher crystalline orientation of the MgO(001) barrier layer could have enhanced the coherent tunneling of /spl Delta//sub 1/ electrons, resulting in an increase of MR ratio at the low RA (thin MgO thickness) region. The annealing temperature and free layer materials have also been optimized to satisfy the requirements for practical read head application. Although this optimization resulted in a reduction in the MR ratio to about 45%-53%, this value is still more than twice the highest MR ratio of conventional MTJs. The currently developed fabrication process will accelerate the development of highly sensitive read heads for ultrahigh-density hard-disk drives. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
