Superoxygenation: analysis of oxygen transfer design parameters using high-purity oxygen and a pressurized column

Autor:	Donald S. Mavinic, Tyler W. Barber, Ken Christison, Ken I. Ashley
Rok vydání:	2015
Předmět:	Mass transfer coefficient Oxygen transfer Chemistry Environmental engineering Analytical chemistry chemistry.chemical_element Energy requirement Oxygen Pressure swing adsorption Aeration Oxygen gas Saturation (chemistry) General Environmental Science Civil and Structural Engineering
Zdroj:	Canadian Journal of Civil Engineering. 42:737-746
ISSN:	1208-6029 0315-1468
DOI:	10.1139/cjce-2015-0037
Popis:	There remains significant potential for improvement in oxygen transfer efficiency, which can account for 60% of water and wastewater treatment energy requirements. This research examined superoxygenation, or aerating water under pressure with high-purity oxygen gas. Examined were the effects superoxygenation has on five key aeration design parameters: the mass transfer coefficient (KLa), saturation concentration ([Formula: see text]), standard oxygen transfer rate (SOTR), standard aeration efficiency (SAE), and standard oxygen transfer efficiency (SOTE). This research compared values under pressures of 0, 50, 100, 150, and 200 kPa using air and pressure swing adsorption (PSA) generated oxygen. It was found that with increasing pressure for both air and PSA oxygen: KLa decreased, [Formula: see text] increased, SOTR and SAE remained constant, and SOTE increased. While comparing air and PSA oxygen, oxygen was found to have a similar KLa, larger [Formula: see text], SOTR, and SOTE, and a lower SAE. It was concluded that superoxygenation is a viable method for increasing oxygen transfer and could potentially reduce oxygenation costs in water treatment processes.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::511f8c63ce868a7d708ca0dc603c08ff https://doi.org/10.1139/cjce-2015-0037 Zobrazit plný text záznamu Plný text ve formátu PDF