Semiconducting elastomers based on polyaniline/clay nanocomposites and SEBS obtained by an alternative processing technique
| Autor: | Jorge L. Olmedo-Martínez, Claudia María De León-Almazan, Iván Alziri Estrada-Moreno, José Luis Rivera-Armenta |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Materials science
Scanning electron microscope 02 engineering and technology 010402 general chemistry Elastomer 01 natural sciences chemistry.chemical_compound Natural rubber Polyaniline Materials Chemistry Composite material chemistry.chemical_classification Nanocomposite Mechanical Engineering Metals and Alloys Dynamic mechanical analysis Polymer 021001 nanoscience & nanotechnology Condensed Matter Physics 0104 chemical sciences Electronic Optical and Magnetic Materials Dielectric spectroscopy chemistry Mechanics of Materials visual_art visual_art.visual_art_medium 0210 nano-technology |
| Zdroj: | Synthetic Metals. 268:116460 |
| ISSN: | 0379-6779 |
| DOI: | 10.1016/j.synthmet.2020.116460 |
| Popis: | The use of Polyaniline (PAni) as conductive filler in several kinds of non-conductive polymers, such as elastomers, has been extensively studied in the production of easily processable semiconductors. This work focuses on the use of a PAni/clay nanocomposite (PCN) – instead of pristine PAni – as conductive filler of styrene-butadiene rubber (SEBS) to produce a PCN/SEBS semiconducting elastomer. In order to accomplish this, a novel solvent-free and low-temperature press-processing technique was proposed and applied. It was also compared to the traditional rubber mechanical processing method. The preparation of PCN/SEBS was conducted by following a two-stage procedure: Pain in situ synthesis and mechanical mixing. PCN/SEBS was characterized by Raman spectroscopy, dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM), the electrical properties were measured by means of the two-probe technique and electrochemical impedance spectroscopy (EIS). It was found that the traditional processing method led to a highly insulating material, while the proposed procedure results in semiconducting composites, showing electrical conductivity values up to 10−7 S cm−1. From the mechanical standpoint, this novel treatment results in composites with lower stiffness at low temperatures and similar elastic behavior at the transition region when compared to the material produced by the typical mixing chamber procedure. Although this method still needs to be improved since these materials show less homogeneity than their counterparts and they crumble at ∼100 °C, this work sets the foundation for an alternative processing method to obtain PAni-based semiconducting elastomers. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect