Green Fabrication of Polyimide Fibers with Phosphate Monoester Network to Reinforce Carbon Nanotube Polymer Composites: Simultaneously improving the Mechanical Properties and Flame Retardancy

Autor: Zhang Ruqiang, Yunfeng Cao, Li Zhiqiang, Wang Shihua, Zhu Long, Hongyang Dang, Guo Shuai
Rok vydání: 2021
Předmět:
Zdroj: Applied Composite Materials. 28:465-489
ISSN: 1573-4897
0929-189X
DOI: 10.1007/s10443-021-09878-y
Popis: To further enhance the reinforcing effect of polyimide (PI) fibers on carbon nanotube polymer composites, in this work, networks of long chains of phosphate monoester (PMOEs) were grown on the surface of PI fibers, and silanized multiwalled carbon nanotubes (Si-MWCNTs) were dispersed into the phenolic resin (PR) matrix. Subsequently, these two interpenetrating networks were entangled tightly at the PI-PMOEs fiber paper/PR matrix by vacuum-assisted wet papermaking technology and impregnation and vacuum curing technology. A novel type of PI-PMOEs fiber-reinforced carbon nanotube polymer composite was prepared. Structural observation and analysis revealed that the fiber surface activity and roughness were improved, resulting in enhanced interfacial adhesion. The Si-MWCNTs at the interface play an anchoring role, which leads to a strong mechanical interlock between the PI-PMOEs fibers and the matrix. Therefore, the generation and propagation of cracks encountered greater resistance, and the mechanical properties of the composites were improved. Compared with the Si-MWCNTs/PR composite with tensile strength of 20.29 MPa and elongation at break of 0.1%, the tensile strength and elongation at break of 80PI-PMOEs/Si-MWCNTs/PR (the basis weight of paper is 40 wt.%) composite are increased to 91.22 MPa and 2.0%, respectively. In addition, a tightly connected fiber "large skeleton" was provided by the PI-PMOEs fiber paper with a uniform pore size distribution. The Si-MWCNTs network and the thermally degraded carbides of the matrix formed a "small skeleton" based on the "large skeleton", resulting in a complete and dense protective barrier layer. The volatilization of pyrolysis products (CO, small-molecule hydrocarbons, aromatic compounds, etc.) was restricted, and heat and mass transfer were suppressed. Finally, the composites exhibited excellent flame retardancy.
Databáze: OpenAIRE
Externí odkaz: