Comparative Studies of Mechanical and Interfacial Properties Between Jute Fiber/PVC and E-Glass Fiber/PVC Composites
| Autor: | Kamol Dey, S. Saha, Farah Nigar, Kajal K. Debnath, Rafiqul Islam, Nusrat Sharmin, Manoranjan Saha, Anjan K. Das, Bapi Sarker, Mubarak A. Khan, Towhidul Islam, Ruhul A. Khan |
|---|---|
| Rok vydání: | 2011 |
| Předmět: |
Materials science
Polymers and Plastics Flexural modulus General Chemical Engineering Materials Science (miscellaneous) Compression molding Izod impact strength test Young's modulus Polyvinyl chloride chemistry.chemical_compound symbols.namesake chemistry Flexural strength Ultimate tensile strength Materials Chemistry symbols Fiber Composite material |
| Zdroj: | Polymer-Plastics Technology and Engineering. 50:153-159 |
| ISSN: | 1525-6111 0360-2559 |
| DOI: | 10.1080/03602559.2010.531422 |
| Popis: | Composites (50 wt% fiber) of jute fiber reinforced polyvinyl chloride (PVC) matrix and E-glass fiber reinforced PVC matrix were prepared by compression molding. Mechanical properties such as tensile strength (TS), tensile modulus (TM), bending strength (BS), bending modulus (BM) and impact strength (IS) of both types of composites was evaluated and compared. Values of TS, TM, BS, BM and IS of jute fiber/PVC composites were found to be 45 MPa, 802 MPa, 46 MPa, 850 MPa and 24 kJ/m2, respectively. It was observed that TS, TM, BS, BM and IS of E-glass fiber/PVC composites were found to increase by 44, 80, 47, 92 and 37.5%, respectively. Thermal properties of the composites were also carried out, which revealed that thermal stability of E-glass fiber/PVC system was higher. The interfacial adhesion between the fibers (jute and E-glass) and matrix was studied by means of critical fiber length and interfacial shear strength that were measured by single fiber fragmentation test. Fracture sides after flexural testi... |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|