| Popis: |
A two-step microwave (MW) digestion (ramps to 135 °C and to 185 °C) was set up for the subsequent voltammetric determination of the inert fraction of Cd, Pb and Cu in Antarctic aerosol (PM10), after a sequential extraction with water (soluble fraction) and dilute HCl (acid extractable fraction) of the filter samples. A digestion mixture of 5.0 mL HNO 3 , 1.0 mL H 2 O 2 , and 1.0 mL HF was used. The amount of H 2 O 2 was adjusted at a compromise value to avoid interferences from organic substances or from the reagent itself. Hydrogen fluoride was used at the maximum quantity suggested in the literature, since there were no interferences due to excess HF with the voltammetric measurement. Our procedure did not provide for a third digestion step with H 3 BO 3 , as generally required in order to eliminate excess HF when subsequent spectrochemical analyses are to be carried out. Thus the total digestion time was reduced from ~ 5 h to ~ 1.5 h. The ultrasensitive technique of square wave anodic stripping voltammetry (SWASV) was used and optimized by maximizing the signal-to-noise ratio (frequency 150 Hz, amplitude 20 mV). The limits of detection ( e.g. for atmospheric concentration 0.1–0.3 pg m − 3 for Cd and 1–5 pg m − 3 for Pb and Cu) and the repeatabilities (Cd 21–26%, Pb 16–20%, Cu 11–14% as atmospheric concentration) compared favourably with literature reports. Significant aliquots of metals were present in all the three fractions determined and the inert fraction represented 20–74% for Cd, 10–63% for Pb, and 7–33% for Cu, against total contents of Cd 1–19 pg m − 3 , Pb 17–36 pg m − 3 , and Cu 177–429 pg m − 3 . Possibly significant metal fractions could be associated to the crustal origin. |
Full Text from ScienceDirect