Mechanical, chemical and biological damage modes within head-neck tapers of CoCrMo and Ti6Al4V contemporary hip replacements
| Autor: | Robin Pourzal, Mathew T. Mathew, Deborah J. Hall, Robert M. Urban, Joshua J. Jacobs, Hannah J. Lundberg |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
030222 orthopedics
Materials science Metallurgy Biomedical Engineering Titanium alloy Fretting 02 engineering and technology Surface finish Intergranular corrosion 021001 nanoscience & nanotechnology Microstructure Corrosion Biomaterials 03 medical and health sciences 0302 clinical medicine Pitting corrosion 0210 nano-technology Crevice corrosion |
| Zdroj: | Journal of Biomedical Materials Research Part B: Applied Biomaterials. 106:1672-1685 |
| ISSN: | 1552-4973 |
| Popis: | Total hip replacement (THR) failure due to mechanically assisted crevice corrosion within modular head-neck taper junctions remains a major concern. Several processes leading to the generation of detrimental corrosion products have been reported in first generation modular devices. Contemporary junctions differ in their geometries, surface finishes, and head alloy. This study specifically provides an overview for CoCrMo/CoCrMo and CoCrMo/Ti6Al4V head-neck contemporary junctions. A retrieval study of 364 retrieved THRs was conducted which included visual examination and determination of damage scores, as well as the examination of damage features using scanning electron microscopy. Different separately occurring or overlapping damage modes were identified that appeared to be either mechanically or chemically dominated. Mechanically dominated damage features included plastic deformation, fretting, and material transfer, whereas chemically dominate damage included pitting corrosion, etching, intergranular corrosion, phase boundary corrosion, and column damage. Etching associated cellular activity was also observed. Furthermore, fretting corrosion, formation of thick oxide films, and imprinting were observed which appeared to be the result of both mechanical and chemical processes. The occurrence and extent of damage caused by different modes was shown to depend on the material, the material couple, and alloy microstructure. In order to minimize THR failure due to material degradation within modular junctions, it is important to distinguish different damage modes, determine their cause, and identify appropriate counter measures, which may differ depending on the material, specific microstructural alloy features, and design factors such as surface topography. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1672-1685, 2018. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Plný text