| Popis: |
Currently, Computational Fluid Dynamics (CFD) was utilized to predict the performance, geometry optimization or physical phenomena of a breastshot waterwheel. The CFD method requires the turbulent model to predict the turbulent flow. However, until now there is special attention on the effective turbulent model used in the analysis of breastshot waterwheel. This study is to identify the suitable turbulence model for a breatshot waterwheel. The two turbulence models investigated are: standard k-epsilon model and shear stress transport (SST) k-omega. Pressure based and one degrees of freedom (one-DoF) feature was used in this case with 75 Nm, 150 Nm, 225 Nm and 300 Nm as preloads. Based on the results, the standard k-epsilon model gave similar result with the SST k-omega model. Therefore, the simulation for breastshot waterwheel will be efficient if using the standard k-epsilon model because it requires lower computational power than the SST k-omega model. However, to study about physical phenomenon, the SST k-omega model is recommend. |
