| Autor: |
Satean Tunyasrirut, I. Laoprom, Deacha Puangdownreong, W. Permpoonsinsup |
| Rok vydání: |
2019 |
| Předmět: |
|
| Zdroj: |
2019 16th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON). |
| DOI: |
10.1109/ecti-con47248.2019.8955211 |
| Popis: |
This study presents voltage control with PI controller for four phase interleaved boost converter. The control of voltage control is done by using PI Controller to control output voltage of the four sets of boost converter parallel connected. Each set works interleaving with 90 degree of distance using 586 microhenry inductor, inner resistance of inductor 0.4 ohm/phase, 400 microhenry capacitor, resistance load at the beginning 10 ohm, lowest resistance 2 ohm, input voltage 13.8 volt, output voltage 24 volt. The result of the experiment shows that the circuit maintain the level of output voltage required which is 24 volt, both while changing 10 ohm resistant load to 2 ohm and interchanging. The circuit also still maintain the level of output voltage at 24 volt same. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
