Excimer Laser Crystallisation of Poly-Si TFTs for AMLCDs

Autor: S.D. Brotherton, Carole Anne Fisher, John R. A. Ayres, Frank W. Rohlfing, J. P. Gowers, David J. Mcculloch
Rok vydání: 2000
Předmět:
Zdroj: MRS Proceedings. 621
ISSN: 1946-4274
0272-9172
DOI: 10.1557/proc-621-q7.1.1
Popis: There is interest in reducing the shot number in the poly-Si laser crystallisation process in order to improve its throughput. Two distinct shot number dependent effects have been identified, which are both laser intensity dependent. The critical laser energy density is that which causes full film melt-through, and the major issue occurs at energies greater than this, where there is a considerable degradation in device uniformity with reducing shot number. The cause of this is non-uniform recovery of the full-melt-through fine grain poly-Si, and it is demonstrated that by extending the trailing edge of the beam, the material uniformity at reduced shot number can be improved. For energies less than this, the issue is not so much uniformity, as a general degradation in overall device properties with reducing shot number, which has been correlated with reducing grain size.In more demanding, future applications (such as system-on-panel), it will be necessary to improve circuit performance and approach that of current MOSFET devices. This will require short channel, self-aligned (SA) TFTs, and some of the issues with this architecture, particularly lateral ion implantation damage beneath the gate edge and drain field relief are discussed.
Databáze: OpenAIRE
Externí odkaz: