Morphological Peculiarities of R–Fe–B (R = Nd, Pr) Alloys Formed upon Solidification by Strip-Casting
Autor: | T. P. Kaminskaya, Pavel A. Prokofev, B. A. Ginzburg, A. A. Lukin, Kateřina Skotnicová, A. S. Bakulina, M. V. Zelezhnyi, Miroslav Kursa, Tomáš Čegan, Nikolay A. Dormidontov, G. S. Burkhanov, Natalia B. Kolchugina |
---|---|
Rok vydání: | 2020 |
Předmět: |
010302 applied physics
Diffraction Quenching Materials science Scanning electron microscope Intergranular corrosion Condensed Matter Physics Microstructure 01 natural sciences Phase (matter) 0103 physical sciences Materials Chemistry Crystallite Texture (crystalline) Composite material 010306 general physics |
Zdroj: | Physics of Metals and Metallography. 121:772-782 |
ISSN: | 1555-6190 0031-918X |
DOI: | 10.1134/s0031918x20080049 |
Popis: | X-ray diffraction analysis, scanning electron microscopy, and atomic force microscopy are used to study the phase composition, texture, and peculiarities of the morphology of R–Fe–B (R = Nd, Pr, Dy) alloys prepared by strip-casting technology. Along with the traditional structural components of the alloys, namely, areas characterized by randomly oriented fine grains of the main magnetic phase with the Nd2Fe14B-type structure (which are formed near the contact surface of flakes) and coarse extended textured grains of the phase (in the volume of flakes), wide areas characterized by uniform distribution of rare-earth metal-rich phase with a period of 2–4 µm were also found. The formation of these areas takes place in the absence of coarse dendritic crystallites and, according to the suggested mechanism, is related to the solidification of the melt under conditions of its motion upon quenching on a cooled cylindrical surface. Data indicating the melt twisting upon solidification, which favors the formation of the structure with the aforementioned distribution of intergranular phase, are reported. The data obtained are discussed from the viewpoint of their practical utility for the improvement of the structure of alloys prepared by strip-casting and powders for manufacturing Nd–Fe–B permanent magnets. |
Databáze: | OpenAIRE |
Externí odkaz: |