Development of the System for Measurement of the Vibration Transmissibility of an Anti-vibration Glove
| Autor: | Han-Kee Jang, Seok-Hyun Choi, Seok-In Hong, Tae-Won Park |
|---|---|
| Rok vydání: | 2006 |
| Předmět: |
Measure (data warehouse)
Signal processing Engineering InformationSystems_INFORMATIONINTERFACESANDPRESENTATION(e.g. HCI) business.industry ComputingMilieux_PERSONALCOMPUTING Structural engineering Accelerometer Standard deviation Vibration Vibration transmissibility ComputerSystemsOrganization_SPECIAL-PURPOSEANDAPPLICATION-BASEDSYSTEMS Shaker business Strain gauge ComputingMethodologies_COMPUTERGRAPHICS |
| Zdroj: | Transactions of the Korean Society for Noise and Vibration Engineering. 16:602-608 |
| ISSN: | 1598-2785 |
| DOI: | 10.5050/ksnvn.2006.16.6.602 |
| Popis: | In order to evaluate performance of anti-vibration gloves, it is necessary to measure the transmitted vibration to the hand and the applied forces at the same time while gripping the vibrating handle. In the study a system was developed to measure both the vibration and the forces. The system consists of a measurement handle with eight strain gauges and two accelerometers and a PC-based system with a software for signal processing and evaluation of the hand-transmitted vibration and for control of applied forces in the pre-determined range. The handle was installed on the vibration shaker which is strong enough so as not to be affected by dynamic coupling with the hand-arm system. Whole procedure of ISO 10819 to determine the vibration transmissibility of anti-vibration gloves was programmed into the system. As an example of the application, three subjects joined the test to get vibration transmissibilities of anti-vibration gloves where each glove was tested twice a subject. Average and standard deviation of vibration transmissibility were also calculated. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|