Fracture mechanics and surface chemistry studies of fatigue crack growth in an aluminum alloy
| Autor: | R. G. Hart, Robert P. Wei, P. S. Pao, G. W. Simmons, T. W. Weir |
|---|---|
| Rok vydání: | 1980 |
| Předmět: | |
| Zdroj: | Metallurgical Transactions A. 11:151-158 |
| ISSN: | 2379-0180 0360-2133 |
| DOI: | 10.1007/bf02700451 |
| Popis: | Fracture mechanics and surface chemistry studies were carried out to develop further understanding of the influence of water vapor on fatigue crack growth in aluminum alloys. The room temperature fatigue crack growth response was determined for 2219-T851 aluminum alloy exposed to water vapor at pressures from 1 to 30 Pa over a range of stress intensity factors (K). Data were also obtained in vacuum (at < 0.50 μPa), and dehumidified argon. The test results showed that, at a frequency of 5 Hz, the rate of crack growth is essentially unaffected by water vapor until a threshold pressure is reached. Above this threshold, the rates increased, reaching a maximum within one order of magnitude increase in vapor pressure. This maximum crack growth rate is equal to that obtained in air (40 to 60 pct relative humidity), distilled water and 3.5 pct NaCl solution on the same material. Parallel studies of the reactions of water vapor with fresh alloy surfaces (produced either byin situ impact fracture or by ion etching) were made by Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). The extent of surface reaction was monitored by changes in the oxygen AES and XPS signals. Correlation between the fatigue crack growth response and the surface reaction kinetics has been made, and is consistent with a transport-limited model for crack growth. The results also suggest that enhancement of fatigue crack growth by water vapor in the aluminum alloys occurs through a “hydrogen embrittle ment” mechanism. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|