Electrocatalysis of oxygen reduction when varying the mass ratio of metal nanoparticles to carbon support for catalysts with a 10 to 10 to 80 mol% of Pt and Pd on Ag
| Autor: | Sergio Águila, J.F. Pérez-Robles, Dominic F. Gervasio, I.E. Pech-Pech |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Materials science
Renewable Energy Sustainability and the Environment Inorganic chemistry Energy Engineering and Power Technology chemistry.chemical_element Proton exchange membrane fuel cell 02 engineering and technology 010402 general chemistry 021001 nanoscience & nanotechnology Condensed Matter Physics Electrocatalyst 01 natural sciences 0104 chemical sciences Catalysis Fuel Technology chemistry Electrode Mole Thin film 0210 nano-technology Platinum Carbon |
| Zdroj: | International Journal of Hydrogen Energy. 43:15205-15216 |
| ISSN: | 0360-3199 |
| DOI: | 10.1016/j.ijhydene.2018.06.086 |
| Popis: | The reduction of total Pt-loading in a cathode catalyst without sacrificing performance is one of the key objectives for the large-scale commercialization of proton exchange membrane fuel cell (PEMFC) technology. A core-shell type nanostructured catalyst with a Pt-loading 20 times lower than a commercial catalyst is demonstrated herein to be more active for the electrocatalysis of the oxygen reduction reaction (ORR) in acid electrolyte. The weight ratio of metal nanoparticles on carbon support is the key to achieving the highest ORR activity in a series of silver-based catalysts, all with 10 mol percent of Pt and 10 mol percent of Pd over 80 mol percent of silver (Ag) and supported on untreated Vulcan carbon to form an electrocatalyst (Ag@Pt10Pd10/C) with either 5, 10, 20 or 30 wt% of total metals on carbon; which correspond to a Pt concentration around 1, 2, 3 and 5 wt%, respectively. All metal nanostructures on carbon show a similar morphology, size and structure. Thin films of these four Ag@Pt10Pd10/C catalysts on rotating disk electrodes (TF-RDEs) all shown a 4-electrons pathway for the ORR and give higher exchange current densities (jo > 3.8 mA/cm2) than a commercial Etek Pt20/C catalyst (jo = 2.4 mA/cm2). The Ag@Pt10Pd10/C catalyst with 5 wt% of total metals (1 wt% of Pt) on carbon gives the best electrocatalysis; reducing molecular oxygen to water two times faster and generating 25% higher current per milligram of platinum (mass activity) than the commercial catalyst (Pt20/C). Therefore, the Ag@Pt10Pd10/C catalyst with 5 wt% of total metals is a new catalyst for ORR for a PEMFC with a lower Pt loading and cost. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect