DEVELOPMENT OF HIGH STRENGTH REINFORCED CONCRETE FLAT BEAM SYSTEM
| Autor: | Hisato Hotta, Norio Nakanishi, Katsuki Takiguchi, Yasushi Masui, Koshiro Nishimura, Yasuhiro Tsuneki, Yuichi Koitabashi |
|---|---|
| Rok vydání: | 2008 |
| Předmět: |
Materials science
business.industry Rigid frame Stiffness Building and Construction Structural engineering Cruciform Flexural strength Architecture medicine Physics::Accelerator Physics Development (differential geometry) Restoring force medicine.symptom Composite material business Joint (geology) Beam (structure) |
| Zdroj: | Journal of Structural and Construction Engineering (Transactions of AIJ). 73:827-834 |
| ISSN: | 1881-8153 1340-4202 |
| DOI: | 10.3130/aijs.73.827 |
| Popis: | RC flat beam system, which was rigid frame construction that consisted with RC flat beams and normal RC columns, were researched and developed in the previous study by the authors. The flat beam of this system has wider width than columns have and shorter depth than normal beams have. In this study, high strength RC was used for the flat beam system. In order to investigate performance of high strength RC flat beam system, cyclic loading tests of two beam-column joint specimens were carried out, which one is cruciform joint specimen, the other is corner joint specimen. As results, it can be said that there were no serious problem in this system. All the specimens showed restoring force characteristics of flexural type, and flexural strength could be estimated by traditional ways. An estimating method of stiffness of RC flat beam and column joint was shown in this paper. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|