Structure and Magnetic Properties of Co40Fe40V20 Thin Films
| Autor: | Po-Wei Chi, Ming-Ru Chiang, Wen-Jen Liu, Te-Ho Wu, Wei-Hsuan Li, Yuan-Tsung Chen, Jiun-Yi Tseng, Yung-Huang Chang |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Diffraction
Materials science Spin states Biomedical Engineering Analytical chemistry Bioengineering 02 engineering and technology General Chemistry Substrate (electronics) Coercivity 021001 nanoscience & nanotechnology Condensed Matter Physics Magnetic susceptibility Amorphous solid Remanence General Materials Science Thin film 0210 nano-technology |
| Zdroj: | Journal of Nanoscience and Nanotechnology. 19:5974-5978 |
| ISSN: | 1533-4880 |
| DOI: | 10.1166/jnn.2019.16593 |
| Popis: | This study investigated the structure and magnetic properties of Co40Fe40V20 thin films with a thicknesses (tf) of 10 nm to 100 nm on a glass substrate. The X-ray diffraction (XRD) patterns of the CoFeV films demonstrated a significant crystalline body-centered cubic (BCC) CoFe (110) structure when the thickness was between 60 and 100 nm, and an amorphous status were shown when the thickness was from 10 to 50 nm. The strongest crystalline XRD peak was at 60 nm because it had a continuous mode of film growth and induced a large grain distribution. The low-frequency alternating current magnetic susceptibility (ϰac) property decreased when the frequency increased. The lowest ϰac value was detected at 60 nm owing to the large grain distribution inducing high coercivity (Hc) and then enhancing the spin coupling strength. The external field (Hext) was difficult to rotate spin state, then deduces the spin sensitivity and ϰac value is decreased. The highest ϰac meant the spin sensitivity was maximized at the optimal resonance frequency. The 50-mm thickness had the highest ϰac 0.045 value at an fres of 100 Hz. The fres value was less than 1000 Hz at all CoFeV thicknesses, suggesting that CoFeV films would be suitable for low-frequency magnetic component applications. Moreover, the saturation magnetization (Ms) revealed a thickness effect when the thicknesses had a larger Ms. The Hc values were between 3 Oe and 10 Oe at all CoFeV films, except for 60 nm. The Hc of the 60 nm film was about 80 Oe due to the larger grain distribution, and it induced strong remanent magnetization (Mr) and a larger squareness ratio (Mr/Ms) of 92%. The results of the magnetic measurement showed that the 60 nm Co40Fe40V20 film had greater Hc and a good squareness ratio. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|