Electrodialysis desalination designed for off-grid wind energy
Autor: | Baltasar Peñate, Fernando López Castellano, Jose M. Veza |
---|---|
Rok vydání: | 2004 |
Předmět: |
Engineering
Electrodialysis reversal Wind power business.industry Mechanical Engineering General Chemical Engineering Environmental engineering General Chemistry Converters Electrodialysis Desalination Power (physics) Renewable energy Harmonics General Materials Science business Water Science and Technology Marine engineering |
Zdroj: | Desalination. 160:211-221 |
ISSN: | 0011-9164 |
Popis: | An electrodialysis desalination plant has been set up and tested to treat brackish water while driven from an off grid wind energy system. The tests were carried out in the framework of a wider scope project, located on Gran Canaria Island (Spain). The main goal of this project was to test and identify the most suitable desalination systems for connection to the above-mentioned medium-scale off grid wind farm. After having previously analysed the behaviour of the system on-grid, the following stage was to develop an operational envelope for the electrodialysis reversal (EDR) unit while operating off grid, i.e., only coupled to the wind farm. The unit included power converters for the membrane stacks (DC-drivers) and variable frequency drivers (VFD) for the feed pumps. The tests were carried out to establish the power intervals for the EDR unit depending on the product flow rate specified as well as water quality. Product flow rate between 3 and 8.5 m3/h, power requirements between 4 and 19 kW, while product water conductivity ranged between 200 and 500 μS/cm were recorded. The desalination unit showed good flexibility, adapting smoothly to variations in wind power, even when sudden drops or rises occurred. The control system, slightly modified from a standard design, can cope with such sudden variations. Good agreement between performance predicted with software and the actual operating performance was observed. The presence of harmonics in the electric system due to DC drivers and VFD became harmful for the control and electric system, and care must be taken through appropriate mitigating measures. |
Databáze: | OpenAIRE |
Externí odkaz: |