| Popis: |
In the present study, the flexural behavior of concrete-filled steel tube (CFST) beams strengthened by welding round steel at the soffit of the beam has been investigated. First, a total of six specimens were tested under four-point bending load, which includes one reference beam and five retrofitted beams strengthened by welding round steel of different diameters at the soffit of the beams. Then, the corresponding nonlinear finite-element models have been developed and calibrated against the experimental results. By combining indoor experiments and numerical simulations, the bending moment versus mid-span curvature curves, the flexural capacities, flexural stiffness, ductility, vertical deflection curves, strain distribution across the cross-section, and neutral axis offset of the test beams have been systematically analyzed. The results show that the welded round steel at the soffit can improve the flexural bearing capacity and stiffness of the CFST beams significantly. This can be attributed to the CFST beams benefitting from the flexural bearing effect of the round steel and the downward offset of the neutral axis which causes more core concrete to be in compression. Further, the larger the diameter of the round steel, the greater the benefit. Finally, comparisons have been made with the flexural stiffness calculated using the existing design codes, such as AIJ standard, BS5400, Eurocode 4 and AISC specification. The comparisons show that the flexural stiffness of the unstrengthened CFST beam can be predicted by AIJ and BS5400 perfectly, whereas those of the strengthened CFST beams can only be accurately calculated by AISC. |
Full Text from ScienceDirect