Electrical Resistivity and Magnetic Performance of Ceramics-Bonded Nd-Fe-B-Type Magnet Consolidated Using Dielectric Oxide Binder
| Autor: | Jae-Gil Lee, Kwang-Ho Shin, Minjoo Kang, Hansang Kwon, Ki-Chan Kim, Do-Hyang Kim |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
010302 applied physics
Materials science Analytical chemistry Oxide Dielectric Magnetic particle inspection Coercivity Type (model theory) 01 natural sciences Electronic Optical and Magnetic Materials Condensed Matter::Materials Science chemistry.chemical_compound chemistry Electrical resistivity and conductivity Condensed Matter::Superconductivity Magnet 0103 physical sciences Magnetic nanoparticles Electrical and Electronic Engineering |
| Zdroj: | IEEE Transactions on Magnetics. 55:1-5 |
| ISSN: | 1941-0069 0018-9464 |
| DOI: | 10.1109/tmag.2019.2896889 |
| Popis: | Anisotropic ceramics-bonded Nd-Fe-B-type magnet with high electrical resistivity was fabricated with the intention of suppressing induction of eddy current thus lowering operating temperature of the magnet used as rotor magnet in high-speed motor. The ceramics-bonded Nd-Fe-B-type magnet was fabricated by consolidating mixture of hydrogenation decomposition desorption recombination powder and oxide ceramics with the low melting point. Anisotropic ceramics-bonded (15 vol%) Nd-Fe-B-type magnet had remarkably enhanced electrical resistivity ( $\sim 730~\mu \Omega \cdot \text {cm}$ ) with respect to the magnet without ceramics binder ( $\sim 220~\mu \Omega \cdot \text {cm}$ ). Thanks to low-temperature consolidation of Nd-Fe-B-type particles using oxide ceramic binder with low melting point, the detrimental reaction between the magnetic particle surface and oxide was profoundly suppressed, thus retaining the high coercivity of initial magnetic particles even in the ceramics-bonded magnets. Ceramics-bonded (15 vol%) magnet, which had good room temperature magnetic performance ( $_{\mathrm {i}}H_{\mathrm {c}}= 12.7$ kOe, $M_{\mathrm {r}}= 9.4$ kG, and (BH) $_{\mathrm {max}}= 17.0$ MGOe) still had reasonably good performance [ $_{\mathrm {i}}H_{\mathrm {c}}= 5.0$ kOe, $M_{\mathrm {r}}= 8.7$ kG, and (BH) $_{\mathrm {max}}= 10.2$ MGOe] at 150 °C. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|