Effects of Nitriding-Quenching and Carburizing-Quenching on Wear Properties of Industrial Pure Iron
| Autor: | Osamu Furukimi, Muhammad Kozin, Masatoshi Aramaki, K. Yoshida |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
010302 applied physics
Quenching Materials science Metallurgy Metals and Alloys chemistry.chemical_element 02 engineering and technology 021001 nanoscience & nanotechnology 01 natural sciences Nitrogen Industrial and Manufacturing Engineering Carburizing Wear resistance chemistry Martensite 0103 physical sciences Materials Chemistry 0210 nano-technology Carbon Nitriding |
| Zdroj: | HTM Journal of Heat Treatment and Materials. 73:131-143 |
| ISSN: | 2194-1831 1867-2493 |
| Popis: | The wear properties of industrial pure iron treated by nitriding-quenching and carburizing-quenching were investigated. Both the nitrogen martensite and carbon martensite produced by each treatment exhibited the same high degree of wear resistance. The results of sliding tests showed that the nano-indentation hardness near the surfaces of both samples had increased. The surface hardening of the nitrogen martensite was more noticeable than that of the carbon martensite. EBSD analysis revealed that plastic strain had been induced on a relatively large scale (around 20 μm) after sliding in the case of the nitrogen martensite. It was found that the high wear resistance of the nitrogen martensite led to strain hardening through the effect of the load applied in the sliding test. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|