Laser Beam as a Precision Tool to Increase Fatigue Resistance in an Eyelet of Undercarriage Drag Strut
| Autor: | Anna Bień, Marek Szkodo, Alicja Stanisławska |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
0209 industrial biotechnology
Materials science Renewable Energy Sustainability and the Environment Mechanical Engineering 02 engineering and technology Nanoindentation 021001 nanoscience & nanotechnology Residual Fatigue limit Industrial and Manufacturing Engineering 020901 industrial engineering & automation Residual stress Drag Management of Technology and Innovation Ultimate tensile strength General Materials Science Dislocation Composite material 0210 nano-technology Base metal |
| Zdroj: | International Journal of Precision Engineering and Manufacturing-Green Technology. 9:175-190 |
| ISSN: | 2198-0810 2288-6206 |
| Popis: | The article contains the results of tests on a laser-processed eyelet of undercarriage drag strut to increase its fatigue strength. Laser processing concentrated on both sides around the hole of eye for connecting the undercarriage drag strut caused that the material in this area withstood more than twice the number of load cycles established for this material. In order to determine the reasons for the increase in fatigue strength, residual stresses in laser-treated LT areas and in the base metal BM located between melted paths were determined, using the nanoindentation test and Williamson Hall method. The modified Williamson Hall analysis of XRD patterns was also used to determine the dislocation density in both areas. The results indicate that high residual tensile stresses occur in melted areas and in base metal located between melted paths occur high residual compressive stresses. A large increase in hardness and elastic properties, dissolution of non-metallic inclusions, as well as large solid solution and sub-grain strengthening contributed to the high fatigue resistance of the melted areas. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink