| Autor: |
Yuan Gao, Cuixia Cai, Handuo Wang, Hailang Yu, Nisha Wang, Jiang Liu |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
Proceedings of the 2016 International Conference on Civil, Transportation and Environment. |
| DOI: |
10.2991/iccte-16.2016.229 |
| Popis: |
Cone-shaped tubular anode substrates were prepared successfully by phase inversion technique. The effect of several kinds of organic additives on the microstructure development of NiO-YSZ anode support has been investigated. The scanning electron microscopy (SEM) results of NiO-YSZ anode supports show that the organic additives can greatly influence microstructure of the anode. Electrochemical testing shows that the single cell provides a maximum power output of 350mW/cm-2 at 800° C using PEG-1000 as additive. The correlation between the electrochemical performance of single cells and microstructure of the anodes had been analyzed in detail. In addition, a two-cell-stack was assembled by connecting cone-shaped anode-supported single cells in series. The chemical performance of the stack had also been tested. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
