| Autor: |
Jianing Liu, Ying Yang, Franziska Staab, Carlos Doñate-Buendia, René Streubel, Bilal Gökce, Fernando Macarri, Philipp Gabriel, Benjamin Zingsem, Detlef Spoddig, Konstantin Skokov, Oliver Gutfleisch, Michael Farle, Stephan Barcikowski, Anna Rosa Ziefuss |
| Rok vydání: |
2023 |
| DOI: |
10.26434/chemrxiv-2023-vw29k |
| Popis: |
The development of new powder feedstocks using nanoparticles (NPs) has the potential to enhance the functionality of as-built parts and overcome the limitations of current additive manufacturing (AM) techniques. This study investigated the impact of NP feedstock modification on the microstructure and functionality of MQP-S after suction casting. Two types of NPs, Ag, and ZrB2, were used, and their effects on grain size distribution and dendritic structure were evaluated. Ag NPs resulted in smaller, more uniform grain sizes and increased functionality, but only for loadings > 0.5 monolayers. ZrB2 resulted in uniformly distributed grain sizes at much lower mass loadings, with even more compact dendritic arms. However, no effect on functionality was observed. The results show that feedstock modification with low melting point metal NPs can improve the microstructure and magnetic properties of permanent magnets produced by AM and highlight the potential of using NPs to develop new powder feedstocks for AM. With this, it provides insights for future research on optimizing AM processes. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
