Mechanical and Durability Analysis of Recycled Materials
Autor: | P.V. Ramana, A.S. Jethoo, Anamika Agnihotri |
---|---|
Rok vydání: | 2021 |
Předmět: |
Cement
Materials science Mechanics of Materials Ground granulated blast-furnace slag Mechanical Engineering 021105 building & construction Metallurgy 0211 other engineering and technologies 020101 civil engineering General Materials Science 02 engineering and technology Durability 0201 civil engineering |
Zdroj: | Key Engineering Materials. 882:228-236 |
ISSN: | 1662-9795 |
DOI: | 10.4028/www.scientific.net/kem.882.228 |
Popis: | The mechanical and durability properties were best at 45% GGBS and 5% Waste Glass with 0.4 water/cement ratio. The recycled materials implemented for mix proportion were waste glass provided considerably to enhance its properties when added with GGBS. In most of the research work, the effect of WG and GGBS in concrete as a partial substitution of fine aggregate and cement individually is analyzed. Previous studies only show the individual impact of these concrete recycled materials on mechanical and durability properties. In the present study, an exact optimum substitution level of cement by GGBS (15 – 60% at an increment of 15%) and fine aggregate by the waste glass (5 – 20% at an increase of 5%) combined for OPC concrete mix. Mechanical (compressive strength, split tensile strength and flexural strength) and microstructural properties (FESEM) were observed on the combination of waste glass and GGBS concrete mix. |
Databáze: | OpenAIRE |
Externí odkaz: |