Tests on cyclic behavior of reinforced concrete frames with brick infill
Autor: | Tsung-Chih Chiou, Shyh-Jiann Hwang |
---|---|
Rok vydání: | 2015 |
Předmět: |
Engineering
Brick Infill wall business.industry Stiffness Structural engineering Geotechnical Engineering and Engineering Geology Compressive strength Earth and Planetary Sciences (miscellaneous) Fracture (geology) medicine Infill Geotechnical engineering Mortar Deformation (engineering) medicine.symptom business |
Zdroj: | Earthquake Engineering & Structural Dynamics. 44:1939-1958 |
ISSN: | 0098-8847 |
DOI: | 10.1002/eqe.2564 |
Popis: | Summary This paper reports the results of cyclic loading tests performed on four specimens consisting of reinforced concrete frames with brick infill walls. The brick infill is pre-laid, followed by the cast in-place RC columns and beams. Test parameters include the height-to-length ratio of the brick infill wall and the mortar compressive strength. Test results reveal that the in-plane lateral strength of brick infill wall is related to the fracture path. The fracture path for brick infill walls with large height-to-length ratios includes bed joints, cross joints, and vertical splitting of bricks. As a result, the lateral strength of this type of brick infill wall is larger. In comparison, the fracture path for brick infill walls with small height-to-length ratios only passes through joints, which is the reason why they have lower lateral strength. Mortar with higher strength improves the lateral strength of brick infill wall. In addition to presenting experimental observations in detail, this paper compares the test results with those obtained from existing methods for assessment of seismic resistance. Comments and recommendations are offered with respect to the capabilities of the assessment methods in predicting stiffness, strength, and ultimate deformation capacity of brick infill walls. Copyright © 2015 John Wiley & Sons, Ltd. |
Databáze: | OpenAIRE |
Externí odkaz: |