| Autor: |
Ze Xin Jiang, Jin Jun Ma, Rong Zhi Mai, Yong Jun Zhang |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Applied Mechanics and Materials. 872:99-106 |
| ISSN: |
1662-7482 |
| DOI: |
10.4028/www.scientific.net/amm.872.99 |
| Popis: |
Three types of low-carbon TMCP steels with different strength of the same carbon equivalent were welded by the flux-cupper back for SAW(FCB) method in this work. The microstructure, hardness and tensile strength of the FCB welded joints were studied. Softening phenomenon occurs in the heat affected zone of low-carbon content and low carbon-equivalent TMCP EH36 steel after high heat input welding. The softened zone is mainly depended on the strength of the base metal (BM), which appears on the fine-grain zone and incomplete crystallize zone of BM with relative low strength, and on the coarse grain zone of BM with high strength. The ratio of the tensile strength between each FCB joint and BM is the same of 0.98 as the same carbon and carbon equivalent content of 0.5% and 0.315% of BM, which is almost independent of the strength of BM. The tensile strength of the incomplete crystallize zone depends on the strength of the BM, which results in the improved strength of the whole softened zone with the increasing strength of base metal. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
