| Autor: |
Mykhailo Mykhailyshyn, Volodymyr Havryliuk, Cheslav Pulka |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Scientific journal of the Ternopil national technical university. 2:117-124 |
| ISSN: |
2522-4433 |
| DOI: |
10.33108/visnyk_tntu2022.02.117 |
| Popis: |
Different methods of surfacing are using to strengthen machine parts. The process of simultaneous induction surfacing consider in the article. The surfacing will perform with using simultaneous centrifugal rotation compared to the traditional surfacing scheme. The disk is located in a fixed position during the entire surfacing process according to the traditional scheme. The rotational movement is carrying out with a certain angular velocity at the time of fusion of the metal layer. The working time of the part increased due to centrifugal rotation. Because the layer of molten metal moves to the edge of the part, increasing its volume. The edge of the part receives the greatest load to the moment of operation. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
