Submicroscopic accessory minerals overprinting clay mineral REE patterns (celadonite–glauconite group examples)

Autor: Tamás Weiszburg, Teresa Jeffries, Erzsébet Tóth, Éva Bertalan, András Bartha, Ildikó Cora, C. Terry Williams
Rok vydání: 2010
Předmět:
Zdroj: Chemical Geology. 269:312-328
ISSN: 0009-2541
Popis: Samples of glauconite, representing different stages of glauconitisation, as well as different formation environments, were analysed for rare earth elements (REE) and other trace elements using a combination of bulk sample and spatially-resolved in situ techniques. The results indicate that the high-sensitivity, spatially-resolved technique of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) produces values up to two orders of magnitude lower than the bulk sample analyses. This suggests that submicroscopic rare earth element-bearing phases are distributed within the glauconite aggregates comprising the bulk samples. Analytical scanning electron microscopy (ASEM) revealed the presence of micrometre-sized grains of apatite and pore filling precipitates of an unidentified (REE, Ca)-phosphate (approximate composition Ca 0.3–0.4 (Ce 0.4 La 0.1–0.2 Nd 0.1 )PO 4 ) in some glauconite grains. The inherent REE concentrations of the glauconite aggregates (i.e., glauconite crystallites without accidental mechanical inclusions or authigenic, not layer silicate mineral precipitates) was found to be relatively low (e.g., typically less than 100 ppm), and this value decreased with increasing glauconitisation (smectite–mica transformation through a series of recrystallisation processes). These results suggest that the REEs substitute for Ca in the interlayer space of the layer silicate structure and, therefore, the REE content decreases as Ca is progressively removed from the interlayer (smectite–mica transition). LA-ICP-MS, when combined with electron probe microanalysis (EPMA) or ASEM, offers an opportunity to exclude submicroscopic accessory minerals from glauconite trace element analyses, and so produces reliable trace element data for the respective minerals which host those elements. These results illustrate that accessory minerals are difficult to eliminate from clay samples, and that care needs to be taken in the interpretation of clay mineral REE distributions, irrespective of the aggregation state of the studied clay (i.e., whether finely dispersed within the sedimentary rock, or forming millimetre-sized aggregates). Model calculations showed that authigenic apatite associated with the studied green marine clays tends to have higher REE content than “bioapatites”, the total REE content being above 10 000 ppm.
Databáze: OpenAIRE