Influence of Gas Metal Arc Welding Parameter on Lap Joint Properties of SS400 Carbon Steel and SUS304 Stainless Steel
| Autor: | Surat Triwanapong, Kittipong Kimapong |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
010302 applied physics
Materials science Carbon steel Mechanical Engineering 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology Microstructure 01 natural sciences Gas metal arc welding Lap joint Mechanics of Materials 0103 physical sciences engineering Shear strength General Materials Science Composite material 0210 nano-technology |
| Zdroj: | Key Engineering Materials. 789:110-114 |
| ISSN: | 1662-9795 |
| DOI: | 10.4028/www.scientific.net/kem.789.110 |
| Popis: | SS400/SUS304 steels lap joint was applied in various industries due to flexible andbeneficial properties of these dissimilar metals joint. Therefore, an investigation for optimization ofa gas metal arc welding (GMAW) for producing the dissimilar metal lap joint should be conductedfor advancing the manufacturing industries. This research applied GMAW with various currents andspeeds to weld SS400/SUS304 lap joint and studied the relationship between the parameters andresuted joint properties. The experiment showed that an increase in the wedling current and a decreasein the welding speed affected to increase the fracture strength, the displacement of the lap joint, andthe joint hardness due to high combination of the materials at the joint interface. The uncombinedmaterials at the carbon steel/weld metal interface had the different hardness and resulted to initiatethe crack that then was propergated until the joint was broken. The weld metal showed the formationof the finer and smaller dendrite structure with increasing the welding current and decreasing thewelding speed. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|