An assessment of damper placement methods considering upfront damper cost
| Autor: | Anthony Blakeborough, Giuseppe Marcantonio Del Gobbo, Martin S. Williams |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | Proceedings of the Institution of Civil Engineers - Structures and Buildings. 173:879-887 |
| ISSN: | 1751-7702 0965-0911 |
| Popis: | Previous studies have shown that earthquake repair costs can be minimised by using large levels of supplemental damping and uniform damper placement. However, it is not always feasible to achieve this damping due to structural or financial restraints. Iterative damper placement methods may be able to achieve higher levels of damping than simple methods such as uniform damping for the same total damper cost. In this work, six damper placement methods were assessed based on structural and non-structural repair costs. The total damper cost was constrained to be the same in each case. The scope of work was limited to linear fluid viscous dampers, concentric braced frames and regular structures. The iterative methods were found to provide a greater total damping coefficient to the structures than the simple methods. This resulted in a higher supplemental damping ratio and lower repair costs. If upfront funds are limited, or if architectural constraints prevent the placement of dampers in lower storeys, then iterative methods provide the most favourable total-building seismic performance. However, the conclusions should be extended cautiously. Although iterative methods are favourable when the upfront damper investment is strictly limited, in terms of total-building seismic performance, it is advantageous to provide a large damping ratio using uniform damping. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|