Desain Media Pembelajaran Geometri SMP Menggunakan 3D Pageflip Professional Berbasis RME Terintegrasi STEM
| Autor: | Feri Tiona Pasaribu, Yelli Ramalisa |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | Logaritma : Jurnal Ilmu-ilmu Pendidikan dan Sains. 8:55-66 |
| ISSN: | 2580-7145 2338-8706 |
| DOI: | 10.24952/logaritma.v8i01.2374 |
| Popis: | The focus of this research is to design geometry learning mediain junior high schools based on RME and integrated with Science, Technology, Engineering and Mathematics (STEM) using 3D Pageflip Proffesional,and to explain quality of the learning media. In the process of design and development of this media used is the ADDIE development model which begins with the stages analysis, design, development, and carried out an evaluation in each stages. Implementation stages will be continued in the following years research. This research resulted in a product in the form of geometry learning media in junior high schools especially eight grade according to purpose. Based on the validity test and practicality test the results obtained from the validation by material experts and media design experts were 4.09 namely 81.8% and 4.21 or 84.2%.Based on the criteria for the validity of the instrument, the criteria for "very valid" were obtained. And the practicality results, namely the results of teacher response questionnaire obtained an average of 4.26 or 85.19%, and the results of student questionnaire responses were 4.07 or 81.4%. Then based on the percentage criteria of practicality of the instrument, it is found that the criteria are very practical and the media can be implemented with minor revisions. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|