Influence of Depth of Cut on Quality of Ground Surface and Cutting Force when Grinding Cermet
| Autor: | Ondrej Hronek, Miroslav Zetek, Tomáš Bakša, Jindrich Farsky |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
0209 industrial biotechnology
Materials science Mechanical engineering 02 engineering and technology Surface finish Grinding wheel Cermet Industrial and Manufacturing Engineering Rod Grinding Vibration 020303 mechanical engineering & transports 020901 industrial engineering & automation Quality (physics) 0203 mechanical engineering Surface roughness |
| Zdroj: | Manufacturing Technology. 18:352-356 |
| ISSN: | 2787-9402 1213-2489 |
| DOI: | 10.21062/ujep/104.2018/a/1213-2489/mt/18/3/352 |
| Popis: | Grinding of cermet was studied to determine the impact of the depth of the cut on the grinding process and the final quality of the finished surface. Depth of cut is an important cutting parameter which affects the whole grinding process in terms of grinding stability, cutting forces, vibrations, spindle load, etc. It is also connected with other cutting parameters such as cutting speed and feed rate which should be optimized to ensure the required surface quality in the required process time. The effect of different depths of cuts on the surface quality in terms of roughness was observed during grinding of two types of cermet rods. An IFM G4 optical device was used for monitoring the surface roughness during tests. The progress of the spindle load was monitored on the grinding machine during grinding. This was used for calculating the resulting cutting forces. Experimental grinding was carried out with a diamond grinding wheel which was dressed before each grinding test. The results of this work will be used for better understanding of the process of grinding cermet. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|