An Innovative Approach To Integrate Fracture, Well-Test, and Production Data Into Reservoir Models
| Autor: | Salem E. Salem, Steef Linthorst, Hussein Badaam, Asnul Bahar, Maged H. Al-Deeb, Mohan Kelkar, Harun Ates |
|---|---|
| Rok vydání: | 2005 |
| Předmět: | |
| Zdroj: | SPE Reservoir Evaluation & Engineering. 8:325-336 |
| ISSN: | 1930-0212 1094-6470 |
| DOI: | 10.2118/84876-pa |
| Popis: | Summary This paper presents an innovative approach to integrate fracture, well-test, and production data into the static description of a reservoir model as an input to the flow simulation. The approach has been implemented successfully in a field study of a giant naturally fractured carbonate reservoir in the Middle East. This study was part of a full-field integrated reservoir-characterization and flow-simulation project. The main input available for this work includes matrix properties and fracture-network, well-test, and production data. Stochastic models of matrix properties were generated using a geo-statistical methodology based on well logs, core, seismic data, and geological interpretation. The fracture network was described in the reservoir as lineaments (fracture swarms) showing two major fracture trends. The network and its properties (i.e., fracture porosities and permeabilities) were generated by reconciling seismic, well-log, and dynamic data (Well Test and Production Log Tool, PLT).** The challenge of the study is to integrate all the input in an efficient and practical way to produce a consistent model between static and dynamic data. As a result, it is expected to reduce the history-matching effort. This challenge was solved by an innovative iterative procedure between the static and dynamic models. The static part consists of the calibration of model permeability to match the well-test permeability. It is done by comparing their flow potentials, kh. In this analysis, the dominant factor in controlling production at each well, either matrix or fracture, was determined. Based on the dominant factor, matrix or fracture permeability was modified accordingly. This way, the changes in permeability are consistent with the geological understanding of the field. The dynamic part was carried out through a full-field flow simulation to integrate production data. The flow simulation at this stage was used to match production capacity, [i.e., to determine whether the given permeability (matrix and fracture) distribution is enough to produce the fluid at the specified pressure during the producing period of the well]. The iteration is stopped once a reasonable production-capacity match is obtained. In general, a good match was achieved within three to four iterations. The generated reservoir description is expected to substantially reduce the effort required to obtain a good history match. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|