Conversion Method between Outdoor and Indoor Measurements for Two Different Kinds of Technologies: c-Si and CdTe Modules
| Autor: | Braisaz, B., Radouane, K. |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2012 |
| Předmět: | |
| DOI: | 10.4229/27theupvsec2012-4bv.2.9 |
| Popis: | 27th European Photovoltaic Solar Energy Conference and Exhibition; 3239-3242 In order to determine the profitability of a PV project, power plant operators need to predict accurately the final energy production. It is crucial to know the operating power of PV modules. The correlation between the peak power and the operating power is therefore a major issue for several services, such as the project design, operation and maintenance. This paper compares measured performance parameters for several photovoltaic modules tested at our outdoor test area near Paris and at EDF R&D indoor laboratory with our AAA flasher. Then the origins of these discrepancies are analyzed and implemented into a model in order to translate outdoor measurements to STC conditions. Finally, a comparison between indoor and corrected outdoor measurements has been made under several meteorological conditions, in order to validate the correction method. Thanks to our model, an uncertainty analysis of the corrected power has been investigated by the Monte-Carlo method. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|