| Popis: |
Purpose In response to the common low sensitivity of fiber Bragg grating (FBG) temperature sensors in measurement, an FBG temperature sensor sensitized in a substrate-type package structure is proposed. Design/methodology/approach The sensitivity of sensors is analyzed theoretically; aluminum alloys with large coefficient of thermal expansion are used; the ANSYS software is used for simulation analysis and optimization design of sensors; real sensors are developed based on simulation results; in this study, a test system was built to test the performance of the proposed sensor. Findings The results suggested that the sensitivity of encapsulated FBG temperature sensor is 27.3 pm/°C in the range of −20 °C to 40 °C, which is 2.7 times that of bare FBG sensor, while the linearity is up to more than 0.99. Practical implications The sensitivity of FBG temperature sensor is greatly improved by the design of the structure. Originality/value This study innovatively proposes substrate-type sensitized FBG temperature sensor. The temperature sensitivity of fiber grating can be improved by single metal structure, and the effect of structural strain can be reduced by a tab structure. The study results provide a reference for the development of like sensors and the further improvement in the sensitivity of FBG temperature sensors. |
